Sony F35 User Manual
51
Viewing and Setting the Viewfinder Displays
Chapt
er
3
B
a
s
ic
A
d
jus
tment
tment
s
and Se
tt
ing
s
s
3-6-4 Viewing the FUNCTION
(Format/Switch Function) Display
(Format/Switch Function) Display
If you press the CANCEL/STATUS button with the
ABNORMAL< ! > display on the screen, the display
changes to the following FUNCTION display:
ABNORMAL< ! > display on the screen, the display
changes to the following FUNCTION display:
a Format indication
The current video format is displayed.
The current video format is displayed.
For details on the formats, see “3-13 Detailed Setting of
the Video Format” (page 61).
the Video Format” (page 61).
b Assignable switch indication
The functions assigned to the assignable buttons and
switch are indicated.
The functions assigned to the assignable buttons and
switch are indicated.
For functions that can be assigned, see “3-2-11 Allocation
of Functions to the Assignable Buttons and Switch” (page
39).
of Functions to the Assignable Buttons and Switch” (page
39).
c OPT LVL indication
When the SRW-1 is connected via the optional CA-F101
Optical Fiber Camera Adapter, the optical levels are
displayed.
CAM: Optical reception level on the camera side
VTR: Optical reception level on the SRW-1 side
The status of the level is indicated with eight segments.
When the SRW-1 is connected via the optional CA-F101
Optical Fiber Camera Adapter, the optical levels are
displayed.
CAM: Optical reception level on the camera side
VTR: Optical reception level on the SRW-1 side
The status of the level is indicated with eight segments.
If 6 to 8 segments are lit: Normal
If 3 to 5 segments are lit: Cautioning level
If only 1 or 2 segments are lit: Warning level
If no segment is lit: No signal or unusable level
If 3 to 5 segments are lit: Cautioning level
If only 1 or 2 segments are lit: Warning level
If no segment is lit: No signal or unusable level
For details, refer to the Operation Manual of the CA-F101.
3-6-5 Setting the Marker Indications
The various markers, such as the center marker and safety
zone marker, can be displayed on the viewfinder and
monitor screens.
zone marker, can be displayed on the viewfinder and
monitor screens.
Example: Center marker (entire cross)
Example: Safety zone marker (90%)
The <CHAR/MARK MIX> page and <MARKER
SETTING> page of the USER (OPERATION) menu allow
you to switch the display of the markers on or off and to set
the display conditions of the markers.
SETTING> page of the USER (OPERATION) menu allow
you to switch the display of the markers on or off and to set
the display conditions of the markers.
Activating/deactivating all the marker
indications for each output
indications for each output
The <CHAR/MARK MIX> page permits you to activate
and deactivate the marker indications for each output.
and deactivate the marker indications for each output.
<CHAR/MARK MIX> page
The MARKER indications are activated for all the outputs
at the factory.
at the factory.
Item
Setting
ND
ND filter selection:
1, 2, 3, 4, 5 (combination allowed)
WHITE
White balance memory selection:
P, A, B (combination allowed)
5600K
Custom mode: 5600K ON/OFF
Cine mode: ON for Daylight, OFF for Tungsten
Cine mode: ON for Daylight, OFF for Tungsten
SHUTT
Shutter mode ON/OFF
FAN
Fan rotation mode selection:
AUTO1, AUTO2, MIN or MAX
G-COMP
Gain compensation mode (normal: OFF)
FUNCTION
FORMAT: 23.98PsF 4:4:4
FORMAT: 23.98PsF 4:4:4
(24)FPS
AS1:OFF
AS2:OFF
AS3:OFF
AS4:OFF
OPT LVL CAM:
xx
xxx
xxx
b
VTR:
xx
xxx
xxx
b
1
2
3
Item
Setting
VF1
Turn all the markers on or off on the
viewfinder connected to the VF1 connector.
viewfinder connected to the VF1 connector.
VF2
Turn all the markers on or off on the
viewfinder connected to the VF2 connector.
viewfinder connected to the VF2 connector.
<CHAR/MARK MIX> U09
VF1 VF2 MONI VBS
VF1 VF2 MONI VBS
CHAR : ON ON ON ON
MARKER:
B
ON ON ON ON
CURSOR: OFF OFF OFF
ZEBRA : OFF OFF OFF OFF
CHAR/MARK LEVEL: 50
CHAR/MARK LEVEL: 50
VF GATE MARKER : OFF