Sony DXC-D35K/D35PK User Manual
Chapter 1 Overview
Chapter 1
Overview
21
DXF-801/801CE Viewfinder
SHUTTER
GAIN UP
TAKE
BATT
REC
TALLY
HIGH LOW
OFF
LIGHT
3
LIGHT switch and light
4
TAKE/TALLY indicator
5
BATT indicator
6
REC/TALLY indicators
7
GAIN UP indicator
8
SHUTTER indicator
9
PEAKING control
0
CONTRAST control
qa
Tally lamp
qs
BRIGHT control
qd
Eyepiece release catch
qf
TALLY switch
qg
DISPLAY switch
qh
Viewfinder connector
Eye cup
1
Eyepiece focusing knob
2
Stopper
Microphone holding screw
Microphone holder
1
Eyepiece focusing knob
Turn this to adjust the viewfinder focus to match your
eyesight. (See page 88.)
eyesight. (See page 88.)
2
Stopper
Lift up when detaching the viewfinder (See page 32).
3
LIGHT switch and light
The light lights the lens and the switch controls the
light as follows.
light as follows.
HIGH/LOW: Turn the light on and control the
brightness.
OFF: Turns the lights off.
4
TAKE/TALLY indicator (orange)
When using the ClipLink function while shooting, this
indicator lights when the TAKE button (7 on page
17) has been pressed to set a Mark IN point and goes
out when a Mark OUT point is set.
indicator lights when the TAKE button (7 on page
17) has been pressed to set a Mark IN point and goes
out when a Mark OUT point is set.
5
BATT (battery) indicator (red)
This lights when the battery capacity is low.
Note
When using a camera control unit, this indicator
flashes when
flashes when
you operate the controls, but this is not a malfunction.
You can switch the scan size of the DXF-801/801CE
in accordance with the aspect ratio selected on the
camera or camcorder.
in accordance with the aspect ratio selected on the
camera or camcorder.
Microphone