Pelco FR106011 User Manual

12

C2649M (9/07)

The following items are supplied:

1

FT106011 transmitter or FR106011 receiver

1

Regulated switching power supply with four plug adapters (North American, Australian, U.K., 
and European configurations); 100-240 VAC, 50-60 Hz input, 12 VDC output

1

1 small flat-tip screwdriver

1

Wall clip with two 4-40 x 0.25-inch Phillips pan head screws with lock washers (for attachment 
of single module to wall)

1 

FT106011/FR106011 Fiber Transmitter and Receiver Installation manual (this manual)

An Audio Select switch, which is a 10-position rotary switch, is provided on the bottom of the 
FT106011 transmitter and the FR106011 receiver  (refer to Figure 5). The Audio Select switch allows 
you to set the desired audio mode of operation.

With the FT106011 transmitter/FR106011 receiver powered off, set the Audio Select switch to the 
desired mode of operation using the supplied screwdriver. Table B lists Audio Select switch settings 
and associated audio modes of operation as indicated on the bottom of the units.

NOTE: If you wish to change the audio mode after the FT106011 transmitter/FR106011 receiver has 
been powered on, power off the transmitter/receiver, change the audio mode, and then power on the 
transmitter/receiver again.