Pelco FR106011 User Manual

C2649M (9/07)

33

Green

Incoming video signal 
is present on the 
channel.

—

No action required.

Red on transmitter 

Incoming video signal 
is not present on the 
channel.

Video source is not 
powered on.

Check power connection to 
the video source.

Video source is not 
connected to the 
transmitter.

Check BNC connections.

Coaxial cable is 
defective.

Replace cable.

Red on receiver

Incoming video signal 
is not present on the 
channel.

Optical signal is not 
being received from the 
transmitter. Optic Fault 
LED is also red.

Refer to the Optic Fault LED 
section in this table.

Video source is not 
powered on.

Check power connection to 
the video source.

Video source is not 
connected to the 
transmitter.

Check BNC connections.

Coaxial cable connected 
to the transmitter is 
defective.

Replace cable.

Table F.  Troubleshooting with Front-Panel Indicators (Continued)