Pelco FR106011 User Manual
8
C2649M (9/07)
Product Overview
DESCRIPTION
The FT106011/FR106011 fiber transmitter and receiver provide simultaneous transmission of one
unidirectional video channel, two bidirectional audio channels, one bidirectional data channel, and
one bidirectional contact closure over one optical fiber (refer to Figure 1).
unidirectional video channel, two bidirectional audio channels, one bidirectional data channel, and
one bidirectional contact closure over one optical fiber (refer to Figure 1).
Figure 1. FT106011/FR106011 Video, Audio, Data, and Contact Closure Transmission
Features of the FT106011/FR106011 fiber optic transmission system include the following:
•
10-bit digitally encoded video for high-quality video transmission over a single fiber
•
Two bidirectional 24-bit digitally encoded audio channels with user-selectable 600-ohm
balanced or 47K-ohm unbalanced input impedance
balanced or 47K-ohm unbalanced input impedance
•
Bidirectional data channel with user-selectable RS-232, RS-422, RS-485 (2-wire/4-wire),
Manchester, Bi-Phase, and Coaxitron
Manchester, Bi-Phase, and Coaxitron
®
communication
•
Bidirectional contact closure that allows a choice of normally open or normally closed outputs
•
Multimode fiber support for distances up to 6 km (3.7 mi)
•
Single-mode fiber support for distances up to 38 km (23.6 mi)
•
Laser diode for transmission of optical signals
NOTE: The FT106011 transmitter/FR106011 receiver is a Class 1 laser product that complies
with FDA radiation performance standard 21CFR Subchapter J and with IEC 60825-1 Edition 1.2,
2001-08.
with FDA radiation performance standard 21CFR Subchapter J and with IEC 60825-1 Edition 1.2,
2001-08.
•
Patent-pending transmission technology allowing Coaxitron control at full-distance capabilities
•
Compatible with NTSC, PAL, and SECAM video standards
•
Designed to meet NEMA TS 2 and Caltrans traffic signal control equipment standards for
ambient operating temperature, mechanical shock and vibration, humidity with condensation,
high-line/low-line voltage conditions, and transient voltage protection
ambient operating temperature, mechanical shock and vibration, humidity with condensation,
high-line/low-line voltage conditions, and transient voltage protection
NOTE: Conformal coating is required for operation in environments with relative humidity
above 95 percent (condensing).
above 95 percent (condensing).
•
No performance adjustments required
•
12 VDC or 24 VAC power supply
•
Stand-alone and rack-mountable modular design
•
LED indicators for monitoring of signal status, laser status, data activity, contact closure
activation, and operating power
activation, and operating power
FT106011
TRANSMITTER
FR106011
RECEIVER
ONE
FIBER
VIDEO
AUDIO
DATA
VIDEO
AUDIO
DATA
CONTACT
CLOSURE
CONTACT
CLOSURE
CONTACT
CLOSURE