Lindy eSATA II Card - 1 Port, ExpressCard/34 51525 Leaflet
Product codes
51525
1 Port ExpressCard e-SATA Controller Adapter Card
System Requirements
System Requirements
OS support: Windows® /2000/XP/Server 2003/Vista
1.
From the main desktop right –click on my computer
then select Manage. In the new computer management
window, select device manager from the left window
panel
then select Manage. In the new computer management
window, select device manager from the left window
panel
2.
Under the “SCSI and RAID Controller(2000/XP) or
storage controllers(vista) category, your should see a
device called JMicorn JM363
storage controllers(vista) category, your should see a
device called JMicorn JM363
.
3.
Right-click on that device and select properties and
under device status is should say it’s working
properly
under device status is should say it’s working
properly
.
The ExpressCard will fit into any ExpressCard .
Push the card into slot, until it “clicks”.
Push the card into slot, until it “clicks”.
See your laptop’s documentation
for more specific information on plugging ExpressCard
adapter .
for more specific information on plugging ExpressCard
adapter .
An ExpressCard enabled computer system
1.
After the card is inserted into the
ExpressCard
,
Windows should automatically detect new
hardware. The Found New Hardware wizard
should appear.
hardware. The Found New Hardware wizard
should appear.
2.
When prompted, insert the included driver CD into
your computer and Windows should automatically
start searching the CD. Otherwise click “Next” to
proceed.
your computer and Windows should automatically
start searching the CD. Otherwise click “Next” to
proceed.
3.
Follow any on screen prompts, until the
card is successfully installed.
card is successfully installed.
Verifying Installation For
Win2k/XP/Vista
Specifications
Bus Interface
ExpressCard 1.0
Form Factor
ExpressCard/34
Connectors
eSATA
Chipset
JMicorn JMB363
Maximum Data Transfer
Rate
3 Gb/s
Compatible Operating
Systems
Windows®
98SE/ME/2000/XP/Server
2003/Vista