Sony DSR250P User Manual
10
Step 2 Preparing the power supply
Setting up the type of the battery pack
Set up the type of the battery pack installed to the camcorder, using the menu. If you do
not set the type, the battery remaining indicator will not indicate the correct capacity.
not set the type, the battery remaining indicator will not indicate the correct capacity.
(1) Push the CUSTOM PRESET/MENU switch in the MENU direction and release
it to display the menu.
(2) Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(3) Turn the SEL/PUSH EXEC dial to select uREMAIN, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select the type of the battery pack, then
(4) Turn the SEL/PUSH EXEC dial to select the type of the battery pack, then
press the dial.
Setting
Meaning
LI-ION
When using a lithium-ion battery pack (BP-L40 (A)/L60A/L90A)
NI-CD
When using a nicad battery pack (NP-1B/BP-90A)
(5) Push the CUSTOM PRESET/MENU switch in the MENU direction and release
it to make the menu disappear.
When the battery capacity is low
The BATT and REC lamps (red) in the viewfinder and the TALLY lamps on the
camcorder will flash.
The BATT and REC lamps (red) in the viewfinder and the TALLY lamps on the
camcorder will flash.
2,3
SETUP MENU
CLOCK SET
LTR S I ZE
REMA I N
LTR S I ZE
REMA I N
[MENU] : END
5
CUST
OM
PRESET
MENU
1
4
SETUP MENU
CLOCK SET
LTR S I ZE
REMA I N
RETURN
LTR S I ZE
REMA I N
RETURN
[MENU] : END
LI-ION
NI-CD
NI-CD
CUST
OM
PRESET
MENU
TC/UB SET
TC PRESET
UB PRESET
TC RUN
TC MAKE
UB T I ME
UB PRESET
TC RUN
TC MAKE
UB T I ME
[MENU] : END