Sony DSR250P User Manual

You can also use an external 48-V microphone by connecting it to the MIC IN +48V
connector. (The optional CAC-12 Microphone Holder is required.)

Remove the two retaining screws (M3 

×

 12) for the optional microphone holder, then

use these screws to attach the CAC-12 Microphone Holder.

Use the following procedure to attach an optional ECM-670 Microphone.

(1) Loosen the screw of the CAC-12 Microphone Holder, then open the holder and

replace the microphone adaptor with the one supplied with the ECM-670
Microphone.

(2) Insert the microphone in the microphone holder, close the holder, and tighten

the screw. Connect the microphone cable to the MIC IN +48 V connector.

Screws removed from the
camcorder

CAC-12

Microphone adaptor

MIC IN +48 V
connector

Mark