Sony DSR-250 User Manual
58
LINE
MIC
+48V
ON
LINE
MIC
+48V
ON
AUDIO
INPUT
FRONT
REAR
FRONT
REAR
Using an external audio system or
microphone
microphone
Connect an audio mixer or other external audio system component to the AUDIO IN
CH1/CH2 connectors.
CH1/CH2 connectors.
(1) Connect an audio mixer or other external audio system component to the
AUDIO IN CH1/CH2 connector.
(2) Set the AUDIO INPUT switch that corresponds to the channel that the cable is
connected to REAR.
(3) Set up the following.
When connecting a microphone:
Set the LINE/MIC selector that corresponds to the channel that the cable is
connected to MIC. If the microphone is powered through its cable, set it to
+48V ON.
When connecting audio equipment:
Set the LINE/MIC selector that corresponds to the channel that the cable is
connected to LINE.
Set the LINE/MIC selector that corresponds to the channel that the cable is
connected to MIC. If the microphone is powered through its cable, set it to
+48V ON.
When connecting audio equipment:
Set the LINE/MIC selector that corresponds to the channel that the cable is
connected to LINE.
Note
If you use other than the 48-V microphone with the LINE/MIC selector set to +48V ON,
a malfunction of the connected equipment may occur.
If you use other than the 48-V microphone with the LINE/MIC selector set to +48V ON,
a malfunction of the connected equipment may occur.
When you unplug the microphone plug
Unplug it while pressing the PUSH button.
Unplug it while pressing the PUSH button.
When the external unit is compatible with 12-V power
The camcorder can supply 12-V power to the unit from the DC OUT 12V connector.
The camcorder can supply 12-V power to the unit from the DC OUT 12V connector.