Sony DSR-250 User Manual

You can make a recording with a stop-motion animated effect using cut recording. To
create this effect, alternately move the subject a little and make a cut recording. We
recommend that you use a tripod, and operate the camcorder using the Remote
Commander after step 6.

(1) Push the CUSTOM PRESET/MENU switch in the MENU direction and release

it to display the menu in standby mode.

(2) Turn the SEL/PUSH EXEC dial to select 

, then press the dial.

(3) Turn the SEL/PUSH EXEC dial to select FRAME REC, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select ON, then press the dial.
(5) Push the CUSTOM PRESET/MENU switch in the MENU direction and release

it to erase the menu display.
The FRAME REC indicator lights up.

(6) Press START/STOP to start cut recording. The camcorder makes a recording

for about six frames, and returns to recording standby.

(7) Move the subject, and repeat step 6.

•Set FRAME REC to OFF in the menu settings.
•Set the MEMORY/CAMERA/VTR selector to VTR or MEMORY.

Notes on cut recording
•The last recorded cut is longer than other cuts.
•The proper remaining tape time is not indicated if you use this function continuously.
•You cannot mark an index during cut recording.

If you set INT. REC to ON in standby mode
The cut recording will be canceled.

FRAME  REC

CAMERA  SET

D  ZOOM
16 : 9W I DE
STEADYSHOT
FRAME  REC
 I NT. REC

 [MENU] : END

CAMERA  SET

D  ZOOM
16 : 9W I DE
STEADYSHOT
FRAME  REC
 I NT. REC
   RETURN

OFF
ON

 [MENU] : END

CAMERA  SET

D  ZOOM
16 : 9W I DE
STEADYSHOT
FRAME  REC
 I NT. REC
   RETURN

ON

 [MENU] : END