Sony DSR-250 User Manual
94
Using with an analog video unit and a PC
– Signal convert function
– Signal convert function
You can convert the analog input signal to the digital signal and output it from the DV
IN/OUT connector on this camcorder. You can capture images and sound from an
analog video unit connecting a PC which has the i.LINK connector to your camcorder.
IN/OUT connector on this camcorder. You can capture images and sound from an
analog video unit connecting a PC which has the i.LINK connector to your camcorder.
(1) Set the MEMORY/CAMERA/VTR selector to VTR.
(2) Push the CUSTOM PRESET/MENU switch in the MENU direction and release
(2) Push the CUSTOM PRESET/MENU switch in the MENU direction and release
it to display the menu.
(3) Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select A/V t DV OUT, then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select ON, then press the dial.
(6) Push the CUSTOM PRESET/MENU switch in the MENU direction and release
(5) Turn the SEL/PUSH EXEC dial to select ON, then press the dial.
(6) Push the CUSTOM PRESET/MENU switch in the MENU direction and release
it to erase the menu display.
(7) Start playback on the analog video unit slightly ahead of the point from which
you want to start capturing images.
(8) Start capturing procedures on your PC. The operation procedures depend on
your PC and the software which you use.
For details on how to capture images, refer to the instruction manual of your
PC and your software.
For details on how to capture images, refer to the instruction manual of your
PC and your software.
After capturing images and sound
Stop capturing procedures on your PC, and stop the playback on the analog video unit.
Stop capturing procedures on your PC, and stop the playback on the analog video unit.
VIDEO
AUDIO
OUT
S VIDEO
S VIDEO
(not supplied)
DV connecting cable
(i.LINK cable) (not supplied)
(i.LINK cable) (not supplied)
: Signal flow
(not supplied)
DV IN/OUT