Sony DSR-200A User Manual

MENU

DIGITAL F          ZOOM/WIDE    
D ZOOM    
16:9WIDE
ZEBRA
TC IND
DATE/TIME
COMMANDER

[ MENU ] : END

MENU

COMMANDER        VTR4
                                OFF
                                 ID
                                 ID SET

[ MENU ] : END

MENU

COMMANDER        VTR4
                                OFF
                                 ID
                                 ID SET

COMMANDER [ STOP ] : ID SET

MENU

ID

VTR 4

STOP

VTR 2

You can avoid having the digital camcorder accidentally respond to signals from other
remote commanders by setting the VTR4/ID/VTR2 switch to ID. Use the supplied
Remote Commander when you set the switch to ID. When you use the Remote
Commander for the first time, register the ID following the procedure below. Once you
have registered the ID, you do not need to do so again.

(1) Install a power source, open the cover, then press MENU to display the menu

in the viewfinder.

(2) Press 

 or 

 to select COMMANDER, then press EXECUTE.

(3) Press 

 or 

 to select ID SET.

(4) Set VTR4/ID/VTR2 on the Remote Commander to ID.
(5) Point the Remote Commander at the Remote Commander sensor on the digital

camcorder and press π on the Remote Commander.
After the beep sound, the ID of the Remote Commander is registered, and the
COMMANDER is set to ID in the menu system.

(6) Press MENU to erase the menu display.