Sony DSR-PD175P/PD177P User Manual

Page of 128
12
– The battery pack is too hot.
Replace the battery pack, or remove it and put 
it in a cool place.
• The power will not be supplied from the battery 
as long as the AC Adaptor is connected to the 
DC IN jack of your camcorder, even when the 
power cord (mains lead) is disconnected from 
the wall outlet (wall socket).
On the charging/recording/playback time
• Times measured with the camcorder at 25 °C 
(77 °F). 10 to 30 °C (50 °F to 86 °F) is 
recommended.
• The recording and playback time will be shorter 
when you use your camcorder in low 
temperatures.
• The recording and playback time will be shorter 
depending on the conditions under which you 
use your camcorder.
You can use the AC Adaptor to obtain AC. 
While you are using the AC Adaptor, the 
battery pack will not lose its charge even 
when it is attached to your camcorder.
Connect your camcorder as shown 
in “Step 3: Charging the battery 
pack” (p. 10).
On the AC Adaptor
• Use a nearby wall outlet when using the AC 
Adaptor. Disconnect the AC Adaptor from the 
wall outlet (wall socket) immediately if any 
malfunction occurs while using your camcorder.
• Do not use the AC Adaptor placed in a narrow 
space, such as between a wall and furniture.
• Do not short-circuit the DC plug of the AC 
Adaptor or battery terminal with any metallic 
objects. This may cause a malfunction.
• Even if your camcorder is turned off, AC power 
(house current) is still supplied to it while 
connected to the wall outlet (wall socket) via the 
AC Adaptor.
Using an outside power source