Sony DCR-DVD105 Manual

Page of 156
63
Us
in
You can record additional material on the 
finalized DVD-RWs (VIDEO mode)/
DVD+RWs by following the steps below if 
there is space to record on the disc.
When using the finalized DVD-RW (VR 
mode) disc, you can record additional 
material on the disc without any 
additional steps.
• Use the AC Adaptor as power source to prevent 
your camcorder from running out of power during 
operation.
• Do not apply shock or vibration to your 
camcorder, and do not disconnect the AC Adaptor 
during operation.
• A DVD menu and a Photomovie created during 
finalizing are deleted.
• When you use a double-sided disc, following 
procedures are required on each side.
1
Connect the AC Adaptor to the DC 
IN jack on your camcorder, then 
connect the power cord to the wall 
outlet.
2
Slide the POWER switch to turn on 
your camcorder.
3
Insert the finalized disc into your 
camcorder.
4
Touch  
t [SETUP].
5
For DCR-DVD105/DVD205/
DVD605/DVD705:
Touch  
DISC 
SET 
[UNFINALIZE].
For DCR-DVD305/DVD755:
Touch  
MEDIA 
SET 
t 
[UNFINALIZE].
6
Touch [YES] 
t [YES], then touch 
 when [Completed.] appears.
If you have created a Photomovie or a
DVD menu in finalizing (p.59), the following 
steps are required.
1
Connect the AC Adaptor to the DC 
IN jack on your camcorder, then 
connect the power cord to the wall 
outlet.
2
Slide the POWER switch to turn on 
your camcorder.
3
Insert the finalized disc into your 
camcorder.
A confirmation dialog asking if you 
record additional scenes appears.
4
Touch [YES] 
t [YES].
[Completed.] appears, then the screen 
returns to the recording screen.
Using the Recorded disc (DVD-RW/DVD+RW)
Recording additional scenes after finalizing
DVD
+RW
When using a DVD-RW (VIDEO 
mode) disc (Unfinalizing)
When using a DVD+RW