Sony HDC-950 User Manual
1-1 (E)
HDC-900/950 IMM
Section 1
Installation Overview
1-1. Checking before Installation
1-1-1. Checking the ROM and Software Version
When connecting the peripheral equipment in the list below to HDC-900/910/950/
930, be sure to check that the ROM and software version on each peripheral device
930, be sure to check that the ROM and software version on each peripheral device
is corresponding to the camera to be connected.
When the HKC-T950 is used by connecting into the HDC-950/930, be sure to check
When the HKC-T950 is used by connecting into the HDC-950/930, be sure to check
the version of ROM of HDC-950/930.
If the ROM and software version is lower than the specified below, be sure to
If the ROM and software version is lower than the specified below, be sure to
perform ROM replacement and updating the software.
If ROM replacement and updating the software are required, contact your local Sony
If ROM replacement and updating the software are required, contact your local Sony
Sales Office/Service Center.
ROM
Peripheral equipment
Board name
Ref No.
Rom version
MSU-700A/750
CPU-293/CPU-286
IC5, IC6/IC5, IC6
Ver. 1.10 or higher
CNU-700
AT-89 or AT-89A
IC4, IC5
Ver. 3.20 or higher
CNU-500
AT-100
IC4, IC5
Ver. 2.80 or higher
RCP-720/721
MPU-79
IC10
Ver. 2.73 or higher
RCP-730/731
MPU-79
IC10
Ver. 2.73 or higher
RCP-740/741
MPU-79
IC10
Ver. 2.73 or higher
RCP-700/701
MPU-92
IC6
Ver. 2.73 or higher
RM-B150
CPU-266
IC4
Ver. 1.00 or higher
HDC-950
AT-130
IC1
Ver. 1.20 or higher
HDC-930
AT-130
IC1
Ver. 1.21 or higher
HDCU-900
AT-141
IC105, IC106
Ver. 1.21 or higher
HDCU-950
AT-149
IC206
Ver. 1.00 or higher
Software
Peripheral equipment
Board name
Software version
RCP-750/751
MPU-123
Ver. 1.01 or higher
RM-B750
MPU-124
Ver. 1.00 or higher
1-1-2. Setting the Format of HDCU (HDC-910/930)
When setting the format of HDCU-900/950 in the system using the HDC-910/930,
be sure to select the format corresponding to the HDC-910/930.