Sony BRC-H700 User Manual

25

Remote Operation

The pan/tilt speed can be adjusted in seven 
levels by inclining the joystick to its maximum 
angle, and pan/tilt operation can be 
controlled easily at low speed. Only the  
maximum pan/tilt speed can be set with the 
previous version.
To select a speed level, hold down the SHIFT 
button and PAN/TILT RESET button at the same 
time for a few seconds, and the CAMERA switch 
lamp on the RM-BR300 starts to flash. Select 
between 1 and 7: 1 for the lowest speed and 7 
is for the highest speed.

Iris can be controlled independently in Bright 
Volume Control mode, selected with a DIP 
Switch(3) on the bottom of the RM-BR300/4. Iris 
and Gain can be adjusted in combination with 
the previous version of the RM-BR300. 

• Shortens the time lag of the Pan/Tilt joystick.
•  Enables fine direction control by the Pan/Tilt 

joystick.

While one object is in focus, you can get the 
next object (Far/Near) into focus by adjusting 
the Focus Volume (Far/Near), when AF and AF 
Assist are set to ON. 

R and B can be adjusted separately with R/B 
Gain Volume when in AWB mode.

You can adjust to focus another subject in a 
forward or backward location with the FOCUS 
control when AF MODE is AUTO and AF ASSIST is 
on.

In addition to the features mentioned in  7.2.1, the 
following features are now available.

The RM-BR300 Remote Control Unit achieves 
remote operation of up to seven cameras in a 
daisy-chain configuration, allowing only one 
operator to manage multiple camera systems.

Various camera settings can be adjusted within 
the menu.  The BRC-H700/BRC-Z700/BRC-Z330 
have sixteen presets each and the BRC-
300/300P has six presets to which pre-defined 
P/T/Z positions and other various camera 
settings can be allocated.

RS-422 cables as well as a supplied RS-232C 
cable are available to connect the camera to 
an optical multiplex unit for long-distance 
operation.

If you select TALLY on the TALLY/CONTACT 
selector, you can control the camera selected 
by the switcher. If you select CONTACT on the 
TALLY/CONTACT selector, you can operate the 
camera selected by the RM-BR300 Remote 
Control Unit. By selecting CONTACT (TALLY) on 
the TALLY/CONTACT selector, you can control 
the camera selected by the switcher and also 
light the camera tally.

The following features can be achieved with the 
RM-BR300/4 and after.

 

Model Name 

Destination 

Serial No. 

    RM-BR300/4 Remote Control Unit 

UC7 

110001-

    RM-BR300/4 Remote Control Unit 

J1 

310001-

    RM-BR300/4 Remote Control Unit 

CE3 

410001-