Sony BRC-H700 User Manual
39
Using the BRC-H700/BRC-Z700/BRC-Z330 as a Second Camera for the PCS-XG80 Video Conferencing System
10
Using the BRC-H700/BRC-Z700 as a Second Camera
for the PCS-XG80 Video Conferencing System
Using the BRC-H700 and the BRC-Z700 as a
Second Camera for the PCS-XG80 Video
Conferencing System
You can connect the BRC-H700, or the BRC-Z700
through the PCS-XG80 Camera Unit.
through the PCS-XG80 Camera Unit.
Connection example for a second camera
Connect the video output connector on the
BRC-H700 and the BRC-Z700 to the VIDEOIN YPbPr
jacks on the front of the Communication System.
BRC-H700 and the BRC-Z700 to the VIDEOIN YPbPr
jacks on the front of the Communication System.
Select “YPbPr” in “Second Camera Input" of the
Camera setup menu.
Camera setup menu.
To switch the picture shot by two cameras
When the camera input selection is available, the
instruction “F2: Switches to the first camera.” Or “F2:
Switches to the second camera.” is displayed at
the bottom of the monitor screen. Each press of
the F2 button on the Remote commander
changes the picture shot by each camera.
instruction “F2: Switches to the first camera.” Or “F2:
Switches to the second camera.” is displayed at
the bottom of the monitor screen. Each press of
the F2 button on the Remote commander
changes the picture shot by each camera.
First camera (PCS-XG80)
BRC-H700/BRC-Z700
to VISCA OUT
VISCA cable (not supplied)
PIN (RCA) connector
to Video
output
(YPbPr)
to VIDEO IN
YPbPr
to VISCA IN
TERMINAL
VISCA OUT
/
OPEN
VIDEO IN
AUDIO 2 IN
MAINTENANCE
Y
Pb
Pr
L
R