Sony DCR-TRV40 User Manual
52
You can record still images such as photographs on tapes.
You can record about 510 images in the SP mode and about 765 images in the LP mode
on a 60-minute tape.
You can record about 510 images in the SP mode and about 765 images in the LP mode
on a 60-minute tape.
(1) In the standby, set PHOTO REC in
to TAPE in the menu settings (p. 201).
(2) Keep pressing PHOTO lightly until a still image appears.
The CAPTURE indicator appears. Recording does not start yet.
To change the still image, release PHOTO, select a still image again, and then
press and hold PHOTO lightly.
To change the still image, release PHOTO, select a still image again, and then
press and hold PHOTO lightly.
(3) Press PHOTO deeper.
The still image on the screen is recorded for about seven seconds. The sound
during those seven seconds is also recorded.
The still image is displayed on the screen until recording is completed.
during those seven seconds is also recorded.
The still image is displayed on the screen until recording is completed.
Recording images with the flash
For the details, see page 49.
Recording images with self-timer
(1) Set PHOTO REC in
to TAPE in the menu settings (p. 201).
(2) Follow steps 1 and 3 on page 51.
Recording still images on a tape
– Tape Photo recording
– Tape Photo recording
2
•••••••
3
CAPTURE
PHOTO
PHOTO