Sony DCR-SX20E User Manual
74
GB
Playing back images stored on
memory card on other devices
memory card on other devices
Images cannot be played back or the
memory card is not recognized.
The device may not support memory card.
Editing movies/photos on your
camcorder
camcorder
Unable to edit.
Unable to edit because of the condition of the
image.
Movies cannot be added in the Playlist.
There is no free space in the recording media.
You can add no more than 99 movies to a
Playlist. Erase unnecessary movies from the
Playlist (p. 44).
You cannot add photos in the Playlist.
A movie cannot be divided.
A movie that is too short cannot be divided.
A protected movie cannot be divided.
A photo cannot be captured from a
movie.
The recording media where you want to save
photos is full.
Dubbing/Connecting to other
devices
devices
The aspect ratio of the playback is not
correct when connecting your camcorder
to the TV.
Set [TV TYPE] according to your TV (p. 68).
The top, bottom, right, and left edges
of images are trimmed slightly on a
connected TV.
The LCD screen of your camcorder can
display recording images across the entire
screen (full pixel display). However, this may
cause slight trimming of the top, bottom, right,
and left edges of images when played back on
a TV which is not compatible with full pixel
display.
It is recommended you record images using
the outer frame of [GUIDEFRAME] (p. 61)
as a guide.
Images are not dubbed correctly.
The A/V connecting cable is not connected
properly. Make sure to connect the cable to the
input jack of another device (p. 48).
Connecting to a Computer
“PMB” cannot be installed.
Check the computer environment or
installation procedure required to install
“PMB.”
“PMB” does not work correctly.
Quit “PMB” and restart your computer.
The camcorder is not recognized by the
computer.
Disconnect devices from the USB jack of the
computer other than the keyboard, mouse,
and your camcorder.
Disconnect the USB cable from the computer
and your camcorder, and restart the computer,
then connect the computer and your
camcorder again in the correct order.