Sony DCR-SR80E User Manual

rte

Playback time

Approximate time (min.) available when you
use a fully charged battery pack.

DCR-SR30E/SR40E

DCR-SR50E/SR60E/SR70E/SR80E

* When the LCD backlight turns on.

On the battery pack
• Before changing the battery pack, slide the

POWER switch to OFF (CHG).

• The CHG (charge) lamp flashes during charging,

or BATTERY INFO (p.34) will not be correctly
displayed under the following conditions.

– The battery pack is not attached correctly.
– The battery pack is damaged.
– The battery pack is fully discharged.

(For BATTERY INFO only.)

• The power will not be supplied from the battery

as long as the AC Adaptor is connected to the DC
IN jack of your camcorder or the Handycam
Station, even when the mains lead is removed
from the wall socket.

• We recommend that you use an NP-FP70, NP-

FP71 or NP-FP90 battery pack when a video light
(optional) is attached.

On the charging/recording/playback time
• Times measured with the camcorder at 25°C

(77°F). (10-30°C (50-86°F) is recommended.)

• Available recording and playback time will be

shorter when you use your camcorder in low
temperatures.

• The available recording and playback time will

be shorter depending on the conditions under
which you use your camcorder.

On the AC Adaptor
• Connect the AC Adaptor to an easily accessible

wall socket close by. If any trouble occurs while
using the adaptor, immediately shut off the power
by removing the plug from the wall socket.

• Do not use the AC Adaptor placed in a narrow

space, such as between a wall and furniture.

• Do not short-circuit the DC plug of the AC

Adaptor or battery terminal with any metallic
objects. This may cause a malfunction.

PRECAUTION
• Even if your camcorder is turned off, AC power

(mains) is still supplied to it while connected to
the wall socket via the AC Adaptor.

Battery pack

Playback time

NP-FP50 (supplied)

140

NP-FP60

210

NP-FP70

295

NP-FP71

350

NP-FP90

525