Sony DCR-TRV461E User Manual
Pla
yba
ck
yba
ck
Playback
57
Locating a scene on a
tape for playback
tape for playback
Searching quickly for a desired
scene – Zero set memory
scene – Zero set memory
1
During playback, press ZERO SET
MEMORY on the Remote
Commander at the point you want to
locate later on.
MEMORY on the Remote
Commander at the point you want to
locate later on.
The tape counter is reset to “0:00:00” and
appears on the screen.
If the tape counter is not displayed, press
DISPLAY on the Remote Commander.
DISPLAY on the Remote Commander.
2
Press
(stop) when you want to
stop playback.
3
Press m REW.
The tape stops automatically when the tape
counter reaches “0:00:00.”
counter reaches “0:00:00.”
4
Press PLAY.
The playback starts from the point
designated “0:00:00” on the tape counter.
designated “0:00:00” on the tape counter.
To cancel the operation
Press ZERO SET MEMORY on the Remote
Commander again.
Commander again.
b
Notes
• There may be a discrepancy of several seconds
between the time code and the tape counter.
• Zero set memory will not function correctly if there
is a blank section between recorded sections on the
tape.
tape.
• The zero set memory function does not work with
tapes recorded on other devices in the Hi8
/
standard 8 mm
system.
Searching for a scene by date of
recording – Date search
recording – Date search
You can locate the point where the recording
date changes.
date changes.
1
Slide the POWER switch repeatedly to
select the PLAY/EDIT mode.
select the PLAY/EDIT mode.
2
Press SEARCH M. on the Remote
Commander repeatedly to select
[DATE SEARCH].
Commander repeatedly to select
[DATE SEARCH].
PLAY
ZERO SET MEMORY
DISPLAY
STOP
m
REW
0:00:00
60min
P-MENU
20
.
/
>
SEARCH M.
STOP
,
continued