Sony DCR-DVD510E User Manual
75
Cu
st
st
om
iz
iz
ing You
r Cam
co
rde
r
r
B
ON
Always displays the remaining media
capacity indicator.
Always displays the remaining media
capacity indicator.
AUTO
Displays the remaining recording time of
movie for about 8 seconds in the following
situations.
Displays the remaining recording time of
movie for about 8 seconds in the following
situations.
– When your camcorder recognizes the
remaining media capacity when the
POWER switch is set to
POWER switch is set to
(Movie).
– When you press DISP/BATT INFO to
switch the indicator from off to on when
the POWER switch is set to
the POWER switch is set to
(Movie).
– When you select the movie recording
mode on the HOME MENU.
b
Notes
• When the remaining recordable time for movies
is less than 5 minutes, the indicator stays on the
screen.
screen.
You can display the recording date and time
when playing back a disc on a device with a
subtitle display function. The default setting
is [ON].
Also refer to the instruction manual of the
playback device.
when playing back a disc on a device with a
subtitle display function. The default setting
is [ON].
Also refer to the instruction manual of the
playback device.
b
Notes
• You cannot set [SUB-T DATE] for a “Memory
Stick PRO Duo.”
You can set this function when you record
still images using the built-in flash, or an
external flash (optional) that is compatible
with your camcorder.
still images using the built-in flash, or an
external flash (optional) that is compatible
with your camcorder.
B
AUTO
Automatically flashes when there is
insufficient ambient light.
Automatically flashes when there is
insufficient ambient light.
ON ( )
Always flashes regardless of the
surrounding brightness.
Always flashes regardless of the
surrounding brightness.
OFF (
)
Records without flash.
b
Notes
• The recommended distance to the subject when
using the built-in flash is approximately 0.3 to
2.5 m (1 to 8 feet).
2.5 m (1 to 8 feet).
• Remove any dust from the surface of the flash
lamp before using it. Flash effect may be
impaired if heat discoloration or dust obscures
the lamp.
impaired if heat discoloration or dust obscures
the lamp.
•
/CHG lamp (p. 122) flickers while charging
the flash, and remains lit when charging is
complete.
complete.
• If you use the flash when shooting a backlit
subject or in bright places, the flash may not be
effective.
effective.
You can set this function when you record
still images using the built-in flash, or an
external flash (optional) that is compatible
with your camcorder.
still images using the built-in flash, or an
external flash (optional) that is compatible
with your camcorder.
HIGH(
)
Makes the flash level higher.
B
NORMAL( )
LOW(
)
Makes the flash level lower.
You can set this function when you record
still images using the built-in flash, or an
external flash (optional) that is compatible
with your camcorder. If you set [FLASH
MODE] (p. 75) to [AUTO] or [ON] when
[REDEYE REDUC] is set to [ON],
still images using the built-in flash, or an
external flash (optional) that is compatible
with your camcorder. If you set [FLASH
MODE] (p. 75) to [AUTO] or [ON] when
[REDEYE REDUC] is set to [ON],
appears on the screen. You can prevent
redeye by activating the pre-flash before
recording.
redeye by activating the pre-flash before
recording.
REMAINING SET
SUB-T DATE
FLASH MODE
FLASH LEVEL
REDEYE REDUC
(Redeye reduction)
(Redeye reduction)
Continued
,