Sony DCR-DVD703E User Manual

DCR-DVD92E/DVD202E/DVD203E/DVD403E/DVD602E/DVD653E/DVD703E/

DVD803E 2-587-623-11 (1)

Step 4: Adjusting the LCD screen and viewfinder

Open the LCD screen 90 degrees to the 
camcorder (



), then rotate it to the best 

angle to record or play (



).





180 degrees 
(max.)

90 degrees to the 
camcorder

DISP/BATT INFO

90 degrees 
(max.)

•

  Be careful not to press the buttons on the LCD 

frame accidentally when you open or adjust the 
LCD screen.

•

  If you open the LCD screen 90 degrees to the 

camcorder, then rotate it 180 degrees to the lens 
side, you can close it with the LCD screen side 
facing out. This is convenient during playback 
operations.

Press and hold DISP/BATT INFO for a few 
seconds until 

 appears. 

This setting is practical when you use your 
camcorder in bright conditions or you want 
to save battery power. The recorded picture 
will not be affected by the setting. To 
cancel, press and hold DISP/BATT INFO 
until 

 disappears.

•

  See [LCD/VF SET] - [LCD BRIGHT] (p.66) to 

adjust the brightness of the LCD screen.

You can view pictures using the viewfinder 
to avoid wearing down the battery, or when 
the picture seen on the LCD screen is poor.

Viewfinder lens 

adjustment lever

Move it until the picture 
is clear.

Viewfinder
Extend the viewfinder 
until it clicks.

•

  You can adjust the brightness of the viewfinder 

backlight by selecting [LCD/VF SET] - [VF 
B.LIGHT] (p.67). 
The recorded picture will not be affected by 
the setting.