Manualsbrain.com
  1. Manuals
  2. Brands
  3. Sony
  4. DCR-DVD703E
  5. User Manual

Sony DCR-DVD703E User Manual

Download
Page of 119
47
DCR-DVD92E/DVD202E/DVD203E/DVD403E/DVD602E/DVD653E/DVD703E/
DVD803E 2-587-623-11 (1)
5
  When you have finished entering 
characters, touch 
 .
The disc title changes to the one you 
entered. 
6
  Touch [END]. 
•
  When you change a disc title already set 
by other devices, the 21st and subsequent 
characters are deleted.
Step 5: Finalizing a disc
1
  Confirm the settings you made in 
steps from 2 to 4 of the “steps for 
finalizing” on the LCD screen.
2
  Touch 
. 
3
  Touch [YES] 
 [YES]. 
Finalizing starts.
•
  Do not apply shock or vibration to your 
camcorder, and do not disconnect the AC 
adaptor during finalizing.
  When you need to disconnect the AC 
adaptor, make sure that the power of your 
camcorder is set to off and disconnect the 
adaptor after the CHG (charge) lamp goes 
off. Finalizing restarts when you connect 
the AC adaptor and turn on your camcorder 
again.  
You cannot remove the disc until the 
finalizing operation is completed.
4
  Touch 
,when [Completed] 
appears.
When using a DVD-R/DVD-RW 
(VIDEO mode)/DVD+RW, 
 
 
flashes after finalizing is completed 
when the POWER switch is set to 
 
(Movie) or 
 (Still). Remove the disc 
from your camcorder.
•
  When you made the setting to enable a creation 
of a DVD menu on DVD-R/DVD-RW (VIDEO 
mode)/DVD+RW, then finalize the disc, the 
DVD menu appears for a few seconds while 
finalizing the disc.
•
  You cannot view a Photomovie with the DVD-
R/DVD-RW (VIDEO mode) discs on your 
camcorder.
•
  After finalizing a disc, the disc indicator and the 
recording format are displayed as shown below:
DVD-R 
 
DVD-RW (VIDEO mode)
 
DVD-RW (VR mode)
 
DVD+RW
 
Playback on DVD devices