Sony DCR-DVD703E User Manual

Page of 119
81
DCR-DVD92E/DVD202E/DVD203E/DVD403E/DVD602E/DVD653E/DVD703E/
DVD803E 2-587-623-11 (1)
Jacks to connect external devices
Pull up the 
shoe cover.
DCR-DVD403E/DVD803E:
Except for DCR-DVD403E/DVD803E:
Extend the view finder, then 
remove the shoe cover.
  Active Interface Shoe 
 
The Active Interface Shoe supplies 
power to optional accessories such as 
a video light, a flash, or a microphone. 
The accessory can be turned on or off 
as you operate the POWER switch on 
your camcorder. Refer to the operating 
instructions supplied with your 
accessory for details.
  The Active Interface Shoe has a safety 
device for fixing the installed accessory 
securely. To connect an accessory, press 
down and push it to the end, and then 
tighten the screw. To remove an accessory, 
loosen the screw, and then press down and 
pull out the accessory.
  You cannot use an external flash (optional) 
and the built-in flash at the same time 
(DCR-DVD403E/DVD803E).
  When an external microphone (optional) 
is connected, it takes precedence over the 
internal microphone (p. 34).
  DC IN jack (p.17)
  REMOTE jack
  Connect other optional accessories.
  Shoe cover
  A/V (audio/video) jack (p.78)
   (USB) jack (p.82)
 
(Except for DCR-DVD92E/DVD202E/
DVD602E)
Dubbing