Sony DCR-HC47E User Manual

Page of 96
67
Tro
ubl
es
hoo
ting
The BACK LIGHT function does not 
function.
• In the following settings, the BACK 
LIGHT function is canceled.
– [MANUAL] of [EXPOSURE]
– [SPOT METER]
• The BACK LIGHT function does not work 
during Easy Handycam operation (p. 17).
A vertical band appears when 
recording candlelight or electric light 
in the dark.
• This occurs when the contrast between the 
subject and the background is too high. 
This is not a malfunction.
A vertical band appears when 
recording a bright subject.
• This phenomenon is called the smear effect. 
This is not a malfunction.
Tiny spots in white, red, blue, or 
green appear on the screen.
• The spots appear when you are recording in 
[AUTOSLW SHTR], [SLOW SHUTTR], 
[SUPER NSPLUS], or [COLOR SLOW S]. 
This is not a malfunction.
The color of the picture is not 
correctly displayed.
• Deactivate the NightShot plus function 
The screen picture is bright, and the 
subject does not appear on the 
screen.
• Deactivate the NightShot plus function 
(p. 20), or cancel the BACK LIGHT 
function (p. 21).
The screen picture is dark, and the 
subject does not appear on the 
screen.
• Press and hold DISP/BATT INFO for a few 
seconds to turn on the backlight (p. 12).
Undesirable flicker occurs.
• This anomaly may occur when recording 
pictures under the discharge tube, such as a 
fluorescent lamp, sodium lamp, or mercury 
lamp, with [PORTRAIT] or [SPORTS]. 
This is not a malfunction.
Black bands appear when you 
record a TV screen or computer 
screen.
• Set [STEADYSHOT] to [OFF] (p. 37).
[The lens cover might be closed. 
Check the cover.] appears on the 
screen when the lens cover is open.
• There is not enough light, or the lens is 
covered by your finger or other object.
You cannot use [SUPER NSPLUS].
• The NIGHTSHOT PLUS switch is not set 
to ON (p. 20).
[COLOR SLOW S] does not operate 
correctly.
• [COLOR SLOW S] may not operate 
correctly in total darkness. Use NightShot 
plus or [SUPER NSPLUS].
You cannot play back a tape.
• Slide the POWER switch repeatedly to turn 
on the PLAY/EDIT lamp (p. 22).
• Rewind the tape (p. 22).
Playback
Continued 
,