Sony DCR-TRV285E User Manual

Page of 116
Recor
d
ing
Recording
23
Using zoom
When the CAMERA mode is selected, you 
can choose zoom to magnification levels 
greater than 20 times, and from that point 
activate the digital zoom ([D ZOOM], p. 46).
Occasional use of the zoom is effective, but 
use it sparingly for best results.
Move the power zoom lever slightly for a 
slower zoom. Move it further for a faster 
zoom.
To record wider range of view
Move the power zoom lever towards W.
The subject appears farther away (Wide 
angle).
To record closer view
Move the power zoom lever towards T.
The subject appears closer (Telephoto).
To use the zoom buttons on LCD frame
Keep W pressed to record wider range of view, 
and keep T pressed to record closer view.
b
Notes
• You cannot change the zoom speed with the zoom 
buttons on LCD frame.
• To press the zoom buttons on LCD frame, support 
the LCD panel with your hand.
Using the built-in light
You can use the built-in light to suit your 
shooting situation. The recommended 
distance between the subject and camcorder 
is about 1.5 m (5 feet).
Press LIGHT repeatedly to select a setting.
The settings are displayed cyclically in the 
following order.
No indicator displayed: Always records 
without using the built-in light.
m
: Automatically turns on and off 
according to the ambient brightness.
m
: Always turns on.
To turn off the built-in light
Press LIGHT repeatedly until no indicator 
appears on the screen.
b
Notes
• The built-in video light emits very bright light, 
which is perfectly safe in normal use. However, 
avoid directly aiming the light at a subject’s eyes 
from very close range. 
* The minimum distance required between your 
camcorder and the subject to get a sharp focus in 
that position of the lever.
1 cm (approx. 
1/2 inch)*
80 cm 
(approx. 
2 5/8 feet)*
LIGHT
Built-in light
,continued