Sony DCR-HC62 Manual
69
Tro
ubl
es
hoo
ubl
es
hoo
ting
The power abruptly turns off.
• When approximately 5 minutes have
elapsed while you do not operate your
camcorder, the camcorder is automatically
turned off (A.SHUT OFF). Change the
setting of [A.SHUT OFF] (p. 52), or turn
on the power again (p. 15), or use the AC
Adaptor.
camcorder, the camcorder is automatically
turned off (A.SHUT OFF). Change the
setting of [A.SHUT OFF] (p. 52), or turn
on the power again (p. 15), or use the AC
Adaptor.
• The battery is fully discharged, or almost
discharged. Charge the battery pack (p. 12).
The CHG (charge) lamp does not
light while the battery pack is being
charged.
light while the battery pack is being
charged.
• Slide the POWER switch to OFF (CHG)
• Attach the battery pack to the camcorder
correctly (p. 12).
• Connect the power cord (mains lead) to the
wall outlet (wall socket) properly.
• The battery charge is completed (p. 12).
The CHG (charge) lamp flashes while
the battery pack is being charged.
the battery pack is being charged.
• Attach the battery pack to the camcorder
correctly (p. 12). If the problem persists,
disconnect the AC Adaptor from the wall
outlet (wall socket) and contact your Sony
dealer. The battery pack may be worn-out.
disconnect the AC Adaptor from the wall
outlet (wall socket) and contact your Sony
dealer. The battery pack may be worn-out.
The remaining battery time indicator
does not indicate the correct time.
does not indicate the correct time.
• Ambient temperature is too high or too low,
or the battery pack has not been charged
enough. This is not a malfunction.
enough. This is not a malfunction.
• Fully charge the battery again. If the
• The indicated time may not be correct in
certain circumstances. For example, when
you open or close the LCD panel, it takes
about 1 minute to display the correct
remaining battery time.
you open or close the LCD panel, it takes
about 1 minute to display the correct
remaining battery time.
The battery pack discharges too
quickly.
quickly.
• Ambient temperature is too high or too low,
or the battery pack has not been charged
enough. This is not a malfunction.
enough. This is not a malfunction.
• Fully charge the battery again. If the
A rippling effect appears on the LCD
screen when you touch it.
screen when you touch it.
• This is not a malfunction. Do not press hard
on the LCD screen.
You cannot turn off the indicator.
• You cannot turn off
. Touch
to
check the warning messages (p. 76).
The buttons do not appear on the
touch panel.
touch panel.
• Touch the LCD screen lightly.
• Press DISP/BATT INFO on your
• Press DISP/BATT INFO on your
The buttons on the touch panel do
not work correctly or do not work at
all.
not work correctly or do not work at
all.
• Adjust the touch panel ([CALIBRATION])
Menu items are grayed out.
• You cannot select grayed items in the
current recording/playback situation.
is not displayed.
• During Easy Handycam operation, not all
menu items are functional. Cancel Easy
Handycam operation (p. 20).
Handycam operation (p. 20).
Batteries/Power sources
LCD screen/viewfinder
Continued
,