Sony DCR-HC52 User Manual

Page of 88
52
Troubleshooting
Troubleshooting
If you run into any problems using your 
camcorder, use the following table to 
troubleshoot the problem. If the problem 
persists, disconnect the power source and 
contact your Sony dealer.
• Overall operations/Easy Handycam ..... 52
• Batteries/Power sources ....................... 52
• LCD screen/viewfinder ........................ 53
• Cassette tapes ....................................... 53
• Recording ............................................. 54
• Playback ............................................... 55
• Dubbing/Editing/Connecting to other 
devices .................................................. 55
• Connecting to a computer .................... 56
• Functions that cannot be used together
.............................................................. 56
The power does not turn on.
• Attach a charged battery pack to the 
camcorder (p. 12).
• Use the AC Adaptor to connect to a wall 
outlet (wall socket) (p. 12).
The camcorder does not operate 
even when the power is set to on.
• Disconnect the AC Adaptor from the wall 
outlet (wall socket) or remove the battery 
pack, then reconnect it after about 1 minute.
• Press the RESET button (p. 70) using a 
sharp-pointed object. (If you press the 
RESET button, all settings are reset.)
Buttons do not work.
• During Easy Handycam operation, not all 
buttons are functional (p. 20).
Settings change during Easy 
Handycam operation.
• During Easy Handycam operation, the 
settings of the functions that are not 
displayed on the screen return to their 
defaults (p. 19, 37).
The menu item settings have 
changed unexpectedly.
• The following settings return to the default 
settings automatically when you set the 
POWER switch to OFF(CHG) for more 
than 12 hours.
– backlight
– [SPOT FOCUS]
– [FOCUS]
– [SPOT METER]
– [SCENE SEL.]
– [EXPOSURE]
– [WHT BAL]
– [AUDIO MIX]
The camcorder gets warm.
• The camcorder may get warmer while you 
use it. This is not a malfunction.
The power abruptly turns off.
• When approximately 5 minutes have 
elapsed while you do not operate your 
camcorder, the camcorder is automatically 
turned off (A.SHUT OFF). Change the 
setting of [A.SHUT OFF] (p. 43), or turn 
on the power again (p. 15), or use the AC 
Adaptor.
• Charge the battery pack (p. 12).
• The battery is fully discharged, or almost 
discharged.
The CHG (charge) lamp does not 
light while the battery pack is being 
charged.
• Slide the POWER switch to OFF(CHG) 
Overall operations/Easy 
Handycam
Batteries/Power sources