Sony DCR-HC30/HC40 User Manual

Page of 148
Additional Information
130
menu and leave your camcorder in tape 
recording standby until the power goes off 
(p. 87).
About battery life
• The battery life is limited. Battery capacity 
drops little by little as you use it more and 
more, and as time passes. When the available 
battery time is shortened considerably, a 
probable cause is that the battery pack has 
reached the end of its life. Please buy a new 
battery pack.
• The battery life varies depending on how it is 
stored and the operating conditions and 
environment for each battery pack.
“InfoLITHIUM” is a trademark of Sony 
Corporation.
About i.LINK
The DV Interface on this unit is an i.LINK-
compliant DV Interface. This section describes 
the i.LINK standard and its features.
What is i.LINK?
i.LINK is a digital serial interface for 
transferring digital video, digital audio, and 
other data to other i.LINK-compatible device. 
You can also control other device using the 
i.LINK.
i.LINK-compatible device can be connected 
using an i.LINK cable. Possible applications are 
operations and data transactions with various 
digital AV devices.
When two or more i.LINK-compatible device 
are connected to this unit in a daisy chain, 
operations and data transactions are possible 
with not only the device that this unit is 
connected to but also with other devices via the 
directly connected device.
Note, however, that the method of operation 
sometimes varies according to the 
characteristics and specifications of the device 
to be connected. Also, operations and data 
transactions may not be possible on some 
connected device.
b
Note
• Normally, only one device can be connected to this 
unit with the i.LINK cable. When connecting this 
unit to i.LINK-compatible device having two or 
more DV Interfaces, refer to the operating 
instructions of the device to be connected.
z
Tips
• i.LINK is a more familiar term for the IEEE 1394 
data transport bus proposed by Sony, and is a 
trademark approved by many corporations.
• IEEE 1394 is an international standard standardized 
by the Institute of Electrical and Electronics 
Engineers.
About i.LINK Baud rate
i.LINK’s maximum baud rate varies according 
to the device. There are three types.
S100 (approx. 100Mbps*)
S200 (approx. 200Mbps)
S400 (approx. 400Mbps)
The baud rate is listed under “Specifications” in 
the operating instructions of each piece of