Sony Dcr-hc96 User Manual

E:\SONY\2659813111\01US02GET.fm

DCR-HC36/HC46/HC96

2-659-813-11(1)

Ge
tt

rte

DCR-HC46

* When the LCD backlight turns on.

DCR-HC96

* When the LCD backlight turns on.

On the battery pack
• Before changing the battery pack, slide the

POWER switch to OFF (CHG).

• The CHG (charge) lamp flashes during

charging, or the Battery Info (p. 35) will not be
correctly displayed under the following
conditions.
– The battery pack is not attached correctly.
– The battery pack is damaged.
– The battery pack is worn-out (For Battery

Info only).

• The power will not be supplied from the battery

as long as the AC Adaptor is connected to the
DC IN jack of your camcorder or the Handycam
Station supplied with the DCR-HC46/HC96,
even when the power cord is disconnected from
the wall outlet.

On the charging/recording/playback time
• Times measured with the camcorder at 25°C

(77°F). (10 - 30 °C (50 - 86°F) is
recommended.)

• The recording and playback time will be shorter

when you use your camcorder in low
temperatures.

• The recording and playback time will be shorter

depending on the conditions under which you
use your camcorder.

On the AC Adaptor
• Use the nearby wall outlet when using the AC

Adaptor. Disconnect the AC Adaptor from the
wall outlet immediately if any malfunction
occurs while using your camcorder.

• Do not use the AC Adaptor placed in a narrow

space, such as between a wall and furniture.

• Do not short-circuit the DC plug of the AC

Adaptor or battery terminal with any metallic
objects. This may cause a malfunction.

PRECAUTION
• Even if your camcorder is turned off, AC power

(house current) is still supplied to it while
connected to the wall outlet via the AC Adaptor.

Battery pack

LCD panel
opened*

LCD panel
closed

NP-FP50 (supplied)

120

150

NP-FP70

255

310

NP-FP71

300

370

NP-FP90

455

550