Sony DCR-IP55 Manual

You can dub or edit on the VCR connected to your camcorder using your camcorder as
a player. Connect your camcorder to the VCR using the A/V connecting cable supplied
with your camcorder. The supplied A/V connecting cable is equipped with an S video
plug and a video plug. Use either the S video plug or the video plug depending on the
recorder. Do not connect both of the plugs to the recorder.

Before operation
• Set DISPLAY to LCD in the menu settings. (The default setting is LCD.)
• Press the following buttons to make the indicator disappear so that they will not be

superimposed on the edited tape:
On your camcorder:
DSPL/TOUCH PANEL
On the Remote Commander:
DISPLAY, DATA CODE, SEARCH MODE

(1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert the

recorded tape into your camcorder.

(2) Prepare the VCR for recording, then set the input selector to LINE.

Refer to the operating instructions of the VCR.

(3) Set the POWER switch to VCR.
(4) Play back the recorded tape on your camcorder.
(5) Start recording on the VCR.

Refer to the operating instructions of your VCR.

Stop recording on the VCR, and stop playback on your camcorder.

S VIDEO

VIDEO

AUDIO

IN

A/V

A/V connecting
cable (supplied)

Yellow

White

Red

: Signal flow

Black