Sony CCD-TRV428E User Manual
Getting started
12
Step 2: Charging the
battery pack
battery pack
You can charge the battery by attaching the
“InfoLITHIUM” battery pack (M series)
to your camcorder.
“InfoLITHIUM” battery pack (M series)
to your camcorder.
b
Notes
• You cannot use batteries other than the
“InfoLITHIUM” battery pack (M series) (p. 82).
• Do not short-circuit the DC plug of the AC Adaptor
or battery terminals with any metallic objects. This
may cause a malfunction.
may cause a malfunction.
• Use a nearby wall socket when using the AC
Adaptor. Disconnect the AC Adaptor from the wall
socket immediately if any malfunction occurs.
socket immediately if any malfunction occurs.
1
Lift up the viewfinder.
2
Attach the battery pack by sliding it in
the direction of the arrow until it
clicks.
the direction of the arrow until it
clicks.
3
With the v mark on the DC plug
facing up, connect the AC Adaptor to
the DC IN jack on your camcorder.
facing up, connect the AC Adaptor to
the DC IN jack on your camcorder.
4
Connect the mains lead to the AC
Adaptor.
Adaptor.
5
Connect the mains lead to the wall
socket.
socket.
6
Slide the POWER switch up to (CHG)
OFF.
OFF.
The CHG (charge) lamp lights up and
charging starts.
charging starts.
To the wall socket
DC plug
DC IN jack
Mains lead
AC Adaptor
Battery pack
v
mark