Sony DCR-IP45E User Manual
232
Icon/item
OTHERS
DATA CODE
(On the Remote
Commander)
(On the Remote
Commander)
AREA SET
SUMMERTIME
BEEP
COMMANDER
DISPLAY
REC LAMP
Meaning
When you press the DATA CODE button on the
Remote Commander, the date, time and various
settings are displayed during playback (p. 57).
Remote Commander, the date, time and various
settings are displayed during playback (p. 57).
The date and time are displayed during playback.
To set your area temporarily, when using the
camcorder, in a new location (p. 33).
camcorder, in a new location (p. 33).
To be used when your area is not in daylight
saving time.
saving time.
To be used when your area is in daylight saving
time.
time.
To output the melody when you start/stop
recording or when an unusual condition occurs
on your camcorder.
recording or when an unusual condition occurs
on your camcorder.
To output the beep instead of the melody.
To cancel melody and the beep sound.
To activate the Remote Commander supplied
with your camcorder.
with your camcorder.
To deactivate the Remote Commander to avoid
remote control misoperation caused by other
VCR’s remote control.
remote control misoperation caused by other
VCR’s remote control.
To show the display on the LCD screen and
viewfinder.
viewfinder.
To show the display on the TV screen, LCD
screen and viewfinder.
screen and viewfinder.
To light up the camera recording lamp at the
front of your camcorder.
front of your camcorder.
To turn the camera recording lamp off so that the
subject is not aware of recording.
subject is not aware of recording.
POWER
switch
switch
MEMORY/
NETWORK*
VCR
NETWORK*
VCR
CAMERA
MEMORY/
NETWORK*
MEMORY/
NETWORK*
CAMERA
MEMORY/
NETWORK*
MEMORY/
NETWORK*
CAMERA
MEMORY/
NETWORK*
VCR
MEMORY/
NETWORK*
VCR
CAMERA
MEMORY/
NETWORK*
VCR
MEMORY/
NETWORK*
VCR
CAMERA
MEMORY/
NETWORK*
VCR
MEMORY/
NETWORK*
VCR
CAMERA
MEMORY/
NETWORK*
MEMORY/
NETWORK*
Mode
z
DATE/CAM
DATE
——
z
OFF
ON
z
MELODY
NORMAL
OFF
z
ON
OFF
z
LCD
V-OUT/LCD
z
ON
OFF
Changing the menu settings
* DCR-IP55E only.
Note
If you press DSPL/TOUCH PANEL with DISPLAY set to V-OUT/LCD in the menu settings, the
picture from a TV or VCR will not appear on the LCD screen even when your camcorder is connected
to the output jacks on the TV or VCR.
If you press DSPL/TOUCH PANEL with DISPLAY set to V-OUT/LCD in the menu settings, the
picture from a TV or VCR will not appear on the LCD screen even when your camcorder is connected
to the output jacks on the TV or VCR.
When recording a close subject
When REC LAMP is set to ON, the red camera recording lamp on the front of the camcorder may
reflect on the subject if it is close. In this case, we recommend you set REC LAMP to OFF.
When REC LAMP is set to ON, the red camera recording lamp on the front of the camcorder may
reflect on the subject if it is close. In this case, we recommend you set REC LAMP to OFF.
In more than five minutes after removing the power source
The PROGRAM AE, FLASH LVL, WHT BAL and COMMANDER items return to their default settings.
Other menu items are held in memory even when the battery is removed.
The PROGRAM AE, FLASH LVL, WHT BAL and COMMANDER items return to their default settings.
Other menu items are held in memory even when the battery is removed.