Sony DCR-IP45E User Manual

• 20 titles have been recorded.

c Erase unnecessary title (p. 119).

• The cassette is set to prevent accidental erasure.

c Slide the write-protect tab so that red portion is not visible

(p. 36).

• The tape has a blank portion in the recorded portion.

c Superimpose the title to the recorded position (p. 117).

• The tape is set to prevent accidental erasure.

c Slide the write-protect tab so that red portion is not visible

(p. 36).

• COMMANDER is set to OFF in the menu settings.

c Set it to ON (p. 232).

• Something is blocking the infrared rays.

c Remove the obstacle.

• The batteries are inserted in the battery holder with the + –

polarities incorrectly matching the + – marks.

c Insert the batteries with the correct polarity (p. 290).

• The batteries are dead.

c Insert new ones (p. 290).

• DISPLAY is set to V-OUT/LCD in the menu settings.

c Set it to LCD (p. 232).

• VIDEOINPUT is not set correctly in the menu settings.

c Set it to the appropriate position (p. 226).

• Moisture condensation has occurred.

c Remove the cassette and leave your camcorder for at least

one hour to acclimatize (p. 270).

• Some troubles have occurred in your camcorder.

c Remove the cassette and insert it again, then operate your

camcorder.

• Disconnect the AC power adaptor from a wall socket or

remove the battery, then reconnect it in about one minute. Turn
the power on. If the functions still do not work, press RESET
using a sharp-pointed object. (If you press RESET, all the
settings (DCR-IP55E: except the NETWORK mode settings)
including the date and time return to the default) (p. 283).

The Remote Commander supplied
with your camcorder does not work.

A cassette label is not recorded.

The picture from a TV or VCR does
not appear even when your
camcorder is connected to the
outputs on the TV or VCR.

A title is not recorded.

No function works though the power
is on.

The melody or beep sounds for
five seconds.