Sony DSC-T300 User Manual
85
C
u
st
om
izi
ng the s
izi
ng the s
e
tt
ings
Settings
For details on the operation 1 page 80
Enables you to perform calibration when the touch panel buttons do not react at the
appropriate points where you touch.
Using the paint pen, touch the × mark displayed on the screen.
To stop the calibration process mid-way, touch [Cancel]. The adjustments made up to that
point are not effected.
appropriate points where you touch.
Using the paint pen, touch the × mark displayed on the screen.
To stop the calibration process mid-way, touch [Cancel]. The adjustments made up to that
point are not effected.
The × mark moves on the screen.
If you fail to touch the right spot, the calibration is not performed. Touch the × mark again.
If you fail to touch the right spot, the calibration is not performed. Touch the × mark again.
Changes the function of some buttons to operate the camera when installed in the Housing
(waterproof case).
(waterproof case).
The buttons will work as follows when the setting is [On].
–
Objects cannot be brought into focus by touching the screen.
–
The screen display is always [Normal].
–
Some functions are limited. (The icons are not displayed.)
• Refer also to the operating instructions supplied with the Housing.
Calibration
Housing
On (
)
Changes the function of the buttons.
Off
Does not change any functions.