Sony CCD-TRV99 User Manual
76
– CCD-TRV99 only
You can write the RC time code on a recorded tape. Use the Remote Commander.
Before you begin, we recommend to set COUNTER to TIME CODE in the menu system
so that you can view the RC time code.
Before you begin, we recommend to set COUNTER to TIME CODE in the menu system
so that you can view the RC time code.
(1) While pressing the small green button on the POWER switch, set it to VTR.
(2) Rewind the tape to the beginning and set the camcorder to playback pause
(2) Rewind the tape to the beginning and set the camcorder to playback pause
mode.
(3) Press TIME CODE WRITE on the Remote Commander. The TIME CODE
WRITE indicator appears in the viewfinder or on the LCD screen with the
WRITE indicator flashing.
WRITE indicator flashing.
(4) Press ( or P to start playback. The WRITE indicator stops flashing and the
RC time code writing starts from 0:00:00:00.
To stop writing the RC time code
Press p (or any video control button).
Writing the RC Time code on a recorded
tape
0:00:00:01
TIMECODE
WRITE
1
4
PLAY
PAUSE
TIME CODE
WRITE
-:--:--:--
TIMECODE
WRITE
3
2
PLAY
PAUSE
REW
POWER
VTR
OFF
VTR
CAMERA