Sony 3-280-847-11(1) User Manual

Page of 143
54
C Iris
 appears in the iris value display 
area during playback of the movie 
recorded with the iris manually adjusted 
to its maximum value. 
D Gain
E Shutter speed
F White balance
 appears during playback of the 
movie recorded with the shot transition 
or [MANU WB TEMP].
b
Notes
• The exposure correction value (0EV), shutter 
speed and iris will be displayed during viewing 
of still images on “Memory Stick Duo.”
• Date and time will be displayed in the same area 
when you select the date and time display. If 
you record without setting date and time, [--- -- 
---- ] and [--:--:--] will be displayed.
• An accurate shutter speed may not be displayed 
when you play back a tape recorded with your 
camcorder on another device. Check the data 
code that is displayed on the screen when you 
play back the tape on your camcorder for the 
accurate shutter speed.
• A shutter speed is indicated with [---] during 
playback of the movie recorded with the 
extended clear scan (
).
You can check the settings of the following 
items.
• Audio setup such as microphone volume level 
• Output signal setup ([VCR HDV/DV], etc.) 
• Functions assigned to the ASSIGN buttons 
• Camera setup (p. 68)
• External devices
1
Press the STATUS CHECK button 
C.
2
Turn the SEL/PUSH EXEC dial D 
until a desired display shows up 
on the screen.
When the POWER switch E is set to 
CAMERA, the display changes in the 
following sequence:
AUDIO 
t OUTPUT t ASSIGN t 
CAMERA 
t EXT DEVICE (when an 
external device is connected)
When the POWER switch E is set to 
VCR, the display changes in the 
following sequence:
AUDIO 
t OUTPUT t ASSIGN t 
EXT DEVICE (when an external device 
is connected)
To hide the display
• Press the STATUS CHECK button C.
Set the POWER switch E to OFF, then 
press the DISPLAY/BATT INFO button 
A. The approximate recordable time in the 
selected format and battery information 
appear for about 7 seconds. You can view 
the battery information for up to 20 seconds 
by pressing the button again while the 
information is displayed.
Displaying the settings in your 
camcorder (Status check)
Checking the remaining battery 
(Battery Info)
65
60
Remaining battery (approx.)
Recording capacity (approx.)