Sony 3-286-590-13(1) User Manual

You can dub images played back on your camcorder to other recording devices, such as VCRs 
or DVD/HDD recorders. Connect the device in either of the following ways.
Connect your camcorder to the wall outlet (wall socket) using the supplied AC Adaptor for 
this operation (p. 16). Refer also to the instruction manuals supplied with the devices to be 
connected.
Select the media which contains the images you want to dub before the operation (p. 22).

b

• Movies recorded with HD (high definition) image quality will be dubbed with SD (standard 

• To copy a movie recorded with HD (high definition) image quality, install the application software 

(supplied) on your computer, and copy the images to a disc in the computer.

• Since dubbing is performed via analog data transfer, the image quality may deteriorate.

A A/V connecting cable (supplied)

Your camcorder and the Handycam 
Station are equipped with A/V Remote 
Connector or A/V OUT jack (p. 112, 
115). Connect the A/V connecting cable 
either to the Handycam Station or to 
your camcorder, depending on your 
setup.

B A/V connecting cable with S 

VIDEO (optional)
When connecting to another device via 
the S VIDEO jack, by using an A/V 
connecting cable with an S VIDEO 
cable (optional), higher quality images 

can be produced than with an A/V 
connecting cable. Connect the white and 
red plug (left/right audio) and the S 
VIDEO plug (S VIDEO channel) of the 
A/V connecting cable with an S VIDEO 
cable (optional). The yellow plug 
connection is not necessary. S VIDEO 
connection only will not output audio.

b

• You cannot dub to recorders connected with an 

HDMI cable.

Devices without an 
S VIDEO jack

: Video/Signal flow

A/V OUT jack

S VIDEO

VIDEO

IN

(Yellow)

(White)

(Red)

AUDIO

(Yellow)

(White)

(Red)

VIDEO

AUDIO

IN

VCRs or DVD/
HDD recorders

Devices with an S VIDEO jack