Sony 2-887-515-14(1) User Manual

G:\SONY\PV\CX18500_GB_kaihan\2887515141\2887515141HDRFX7E\01GB05BAS.fm

HDR-FX7E

2-887-515-14(1)

3

Adjust the shutter speed by turning the 
SEL/PUSH EXEC dial D.
You can set a shutter speed between 1/3 
second and 1/10000 second.

The selected shutter speed appears on 
the screen. For example, if you select 
1/100 second, [100] appears. The larger 
the number that appears on the screen, 
the faster the shutter speed.

z

• The shutter speed can be stored temporarily by 

setting the AUTO LOCK switch A to HOLD 
after the manual adjustment.

Press the SHUTTER SPEED button C, or 
set the AUTO LOCK switch A to AUTO 
LOCK.

b

• If you set the AUTO LOCK switch A to 

AUTO LOCK, other manually adjusted items 
(iris, gain, white balance) also become 
temporarily automatic.

• The setting returns to automatic adjustment 

when you set the POWER switch to OFF (CHG) 
for more than 12 hours.

z

• It is difficult to focus automatically at a lower 

shutter speed. Manual focusing with your 
camcorder attached to a tripod is recommended.

• The picture may flicker or change colors under 

fluorescent lamps, sodium lamps, or mercury 
lamps.

You can adjust the white balance according 
to the light of the recording environment.
You can set two sets of white balance 
adjustment data separately in memory A 
and memory B for two different recording 
conditions with 

 A and 

 B. During 

recording, you can select the setup data 
with the SEL/PUSH EXEC dial. The setup 
data will be retained as long as it is not 
readjusted even if the power is 
disconnected.

During recording or standby, set 
the AUTO LOCK switch A to the 
center position to release the 
auto lock mode.

Press the WHT BAL button B.

Display desired item by turning 
the SEL/PUSH EXEC dial C, then 
press the dial.

B

C

A

,