Sony 510P User Manual
Ch
apt
apt
er 8
Sa
v
ing an
d Load
ing Us
er Se
tt
ing
Dat
Dat
a
141
8-2 Saving and Loading Scene Files
8-2 Saving and Loading
Scene Files
You can save various settings for shooting a particular
scene as a scene file. Loading the scene file, you can
quickly recreate setup conditions suitable for the scene.
You can save up to five scene files in the camcorder
memory and up to 100 scene files in a “Memory Stick”.
You can also load data from the “Memory Stick” into the
camcorder memory.
scene as a scene file. Loading the scene file, you can
quickly recreate setup conditions suitable for the scene.
You can save up to five scene files in the camcorder
memory and up to 100 scene files in a “Memory Stick”.
You can also load data from the “Memory Stick” into the
camcorder memory.
Data that can be saved in a scene file
You can save the following data in a scene file:
• Values adjusted using the PAINT menu
• Values adjusted using the PAINT menu
For details of the PAINT menu, refer to the Maintenance
Manual.
Manual.
• Shutter speed settings made in the standard mode and
ECS mode
• The white balance data included in a scene file depends
on the SCENE WHITE DATA setting on the
REFERENCE page of the FILE menu.
REFERENCE page of the FILE menu.
8-2-1 Saving a Scene File
Proceed as follows to save a scene file in the camcorder
memory or the “Memory Stick”.
To save a scene file in the “Memory Stick”, insert the
“Memory Stick” before starting the operation.
memory or the “Memory Stick”.
To save a scene file in the “Memory Stick”, insert the
“Memory Stick” before starting the operation.
1
In the TOP menu, select the FILE menu.
2
Turn the MENU knob until the SCENE FILE page
appears, then press the MENU knob to select the page.
Alternatively, select “SCENE FILE” on the
CONTENTS page to display the SCENE FILE page.
appears, then press the MENU knob to select the page.
Alternatively, select “SCENE FILE” on the
CONTENTS page to display the SCENE FILE page.
If you want to set a file ID for the data to be saved
Set the file ID before going to step 3.
Set the file ID before going to step 3.
For details on setting the file ID, see “Setting the file
ID” on page 143.
ID” on page 143.
3
Turn the MENU knob to move the
b mark to “SCENE
STORE”, and press the MENU knob.
The SCENE STORE page appears.
4
Select the desired file number.
When no “Memory Stick” has been inserted
Turn the MENU knob to move the
Turn the MENU knob to move the
b mark to the
desired file number, and press the MENU knob.
When the save is completed, the SCENE FILE page
appears again.
When the save is completed, the SCENE FILE page
appears again.
When you select a file number where data has
already been saved
The message “OVERWRITE OK? YES
already been saved
The message “OVERWRITE OK? YES
b NO”
appears. In this case, the
b mark is placed on the left
of “NO”.
• To stop overwriting, press the MENU knob.
• To overwrite, move the
• To overwrite, move the
b mark to “YES” and press
the MENU knob.
When a “Memory Stick” has been inserted
You can use up to 20 pages, from P01 to P20, to save
scene files in the “Memory Stick”. Each page can hold
up to 5 files.
You can use up to 20 pages, from P01 to P20, to save
scene files in the “Memory Stick”. Each page can hold
up to 5 files.
1
Turn the MENU knob until the page which
contains the desired file number appears, then press
the MENU knob.
contains the desired file number appears, then press
the MENU knob.
04 SCENE FILE
s1 :STANDARD
s2 :STANDARD
s3 :STANDARD
s4 :STANDARD
s5 :STANDARD
sSTANDARD
SCENE RECALL : EXEC
SCENE STORE : EXEC
F.ID:
TOP
F04 SCENE FILE
s1 :STANDARD
s2 :STANDARD
s3 :STANDARD
s4 :STANDARD
s5 :STANDARD
sSTANDARD
SCENE RECALL : EXEC
SCENE STORE : EXEC
F.ID:
TOP
?P00 SCENE STORE
DISPLAY MODE : ALL
MEM-01:STANDARD
MEM-02:STANDARD
MEM-03:STANDARD
MEM-04:STANDARD
MEM-05:STANDARD
ESC