Sony 510P User Manual

Page of 208
Cha
p
te
r 3  
 Rec
o
rd
ing an
P
la
y
bac
k
52
3-2 Recording
3-2-5 Time-Lapse Video (Interval 
Rec Function) 
Using the memory in the camcorder, you can capture time-
lapse video. There are two modes for this function, which 
is known as “Interval Rec.” 
• Auto Interval Rec mode
In Auto Interval Rec mode, pictures are automatically 
shot a frame at a time at the specified interval and stored 
in memory. To use this function you must set the total 
time for shooting (TAKE TOTAL TIME) and the length 
of time for recording on the disc (REC TIME).
• Manual Interval Rec mode
A specified number of frames (NUMBER OF FRAME) 
is recorded when you press the REC START button or 
the lens VTR button.
There are two Manual Interval Rec modes: a single shot 
mode in which recording is done once with each press of 
the button, and a consecutive mode in which recording is 
done repeatedly at a specified interval after the button is 
pressed.
A pre-lighting function is available in Auto Interval Rec 
mode and the consecutive mode of Manual Interval Rec 
mode. This function automatically turns on the light before 
recording starts, which allows you to record pictures under 
stable light and color temperature conditions.
 
Note
The camcorder cannot be put into Interval Rec mode when 
the scanning mode is 24P (with the CBK-FC01 expansion 
board (see page 130) installed).
Auto Interval Rec mode settings and 
shooting
To make settings before shooting
To record in Auto Interval Rec mode, you need to turn on 
Auto Interval Rec and set the total time from start to finish 
of shooting (TAKE TOTAL TIME) and the length of time 
for recording on the disc (REC TIME), using the USER 
menu.
Notes
• To make settings for Auto Interval Rec mode, set 
“TAKE TOTAL TIME” first, then “REC TIME”.
• To turn on the light automatically before starting to 
record, set the LIGHT switch to AUTO. 
To turn on Auto Interval Rec mode, proceed as follows.
1
Set the MENU ON/OFF switch to ON.
The last accessed menu page appears on the screen.
2
Turn the MENU knob until the FUNCTION 1 page 
appears.
3
Press the MENU knob.
b mark appears on the left of the currently selected 
item and a z mark appears on the left of the setting.
4
Turn the MENU knob to move the 
b mark to 
“CACHE/INTVAL REC”.
5
Press the MENU knob.
The 
b mark on the left of “CACHE/INTVAL REC” 
changes to a z mark and the z mark on the left of the 
setting changes to a ? mark.
MENU knob
MENU ON/OFF switch
? 03  FUNCTION1        TOP
 ASSIGN SW <1>   :    ATW
 ASSIGN SW <2>   :    OFF
 ASSIGN SW <3>   :    OFF
 ASSIGN SW <4>   :    OFF
 TURBO SW        :  TURBO
 DF/NDF          :     DF
 CACHE/INTVAL REC:    OFF
  03  FUNCTION1        TOP
 ASSIGN SW <1>   :    ATW
 ASSIGN SW <2>   :    OFF
 ASSIGN SW <3>   :    OFF
 ASSIGN SW <4>   :    OFF
 TURBO SW        :  TURBO
 DF/NDF          :     DF
 CACHE/INTVAL REC:    OFF
 ASSIGN SW <1>   :    ATW
 ASSIGN SW <2>   :    OFF
 ASSIGN SW <3>   :    OFF
 ASSIGN SW <4>   :    OFF
 TURBO SW        :  TURBO
 DF/NDF          :     DF
 CACHE/INTVAL REC:    OFF
  03  FUNCTION1        TOP