Sony 930 User Manual
7
Chapter 7 Location and Function of Parts and Controls
140
HDC-900/950/930 Series Product Information Manual
7-17.
CA-905L, Large Lens Adaptor
7-17-1
Lens Attachment Section
(Front) and Connectors
(Front) and Connectors
a
Lens lock
Secures the lens by the tongue-like protrusion at the
lens bottom.
lens bottom.
b
Lens lock holding knob
Secures the lens lock. Turn clockwise to tighten, and
counterclockwise to loosen.
counterclockwise to loosen.
c
Lens connector (36-pin)
Connect to the connector on the lens.
d
Cable clamp
Secures the camera cable. The diameter of the cable
with a diameter of 8 to 15 mm should be used with the
cable clamp.
with a diameter of 8 to 15 mm should be used with the
cable clamp.
e
Lens mode switch
Selects one of the two lens communication modes.
During normal operation, set to NORMAL. During use
of a serial communication lens, set to SERIAL.
During normal operation, set to NORMAL. During use
of a serial communication lens, set to SERIAL.
f
CCU (camera control unit) fiber connector:
LEMO type
LEMO type
Connects through an optional fiber cable to the
CAMERA connector on the CCU.
CAMERA connector on the CCU.
g
Number plate holder
Fit the supplied number plates.
h
Accessory bracket
Attach an optional accessory, such as a BKP-7911/
7912 Script Holder.
7912 Script Holder.
i
CA (camera adaptor) cable (fiber connector):
LEMO type
LEMO type
Connect to the CCU connector on the camera adaptor.
j
REMOTE cable (8-pin)
Connect to the REMOTE connector on the camera
adaptor.
adaptor.
k
Lens connector (12-pin)
Connect to the LENS connector of the camera.
BKP-9057 Viewfinder
Saddle (not supplied)
Saddle (not supplied)
qa
Lens connector
1
Lens lock
2
Lens lock
holding knob
3
Lens connector
4
Cable Clamp
Lens mouth
5
Lens mode switch
6
CCU connector
7
Number plate holder
8
Accessory bracket
9
CA cable
q;
REMOTE cable