Sony 930 User Manual
6
Chapter 6 A Quick Lesson on Camera Settings
75
HDC-900/950/930 Series Product Information Manual
1.
Press
[MSU SW Set]
on the MSU Configuration
menu.
The MSU SW Setting display appears.
The MSU SW Setting display appears.
Note
The Test SW Mode Setting area is displayed with
the MSU-750 only.
the MSU-750 only.
2.
Press
[ON]
to set it to inverse video to activate the
screen saver.
3.
When the screen saver is turned on, set the wait
time (in units of minutes) until it activates by
pressing f or F.
time (in units of minutes) until it activates by
pressing f or F.
When the adjustment is completed
Press
[Exit]
to leave this menu.
6-4.
File Structure
The HDC-900 is able to store adjustment data in
memory in the form of files. There are six types of files,
for different purposes:
memory in the form of files. There are six types of files,
for different purposes:
(1) Operator File
Stores the items displayed on the viewfinder and
switch settings for the camera operator. This file is
stored in the Memory Stick media card, yet the video
data (paint data) cannot be stored.
switch settings for the camera operator. This file is
stored in the Memory Stick media card, yet the video
data (paint data) cannot be stored.
(2) Preset Operator File
Stores the standard state of operator file items.
This file is stored in the camera, yet video data (paint
data) cannot be stored.
This file is stored in the camera, yet video data (paint
data) cannot be stored.
(3) Scene File
Stores the temporary video setting data according to
the scene. This file is stored in the camera and Memory
Stick media card.
the scene. This file is stored in the camera and Memory
Stick media card.
(4) Reference File
Stores the custom paint data adjusted by the video
engineer. This file is stored in the camera and Memory
Stick media card.
engineer. This file is stored in the camera and Memory
Stick media card.
(5) Lens File
Used for compensation of the deviation which
generates by switching the lens extender from OFF to
ON and for compensation of the difference in the
characteristics between lenses. This file is stored in the
camera.
generates by switching the lens extender from OFF to
ON and for compensation of the difference in the
characteristics between lenses. This file is stored in the
camera.
(6) OHB File
Used for adjustment of the CCD block maintenance.
This file is stored in the camera.
This file is stored in the camera.
Table 6-1: Structure of Paint Related Files
* The additional data of each file is sent to each circuit on the
unit.
Wait
Time
[min]
MSU SW Setting
5
Exit
ON
PIX/WF
Syncro
PIX/WF
All Mode
ON
ON
PIX/WF Control
Mode
Direct
Alter-
nate
Test SW Mode
3 Step
10 Step
Saw
Screen Saver
Screen saver setting area
When STANDARD
is executed.
is executed.
Reference File
Refer to "File Items".
Factory-set value 0
Scene File
Refer to "File Items".
Lens File
When lens extender setting is OFF, Flare R/G/B and
V Modulation Shading R/G/B/Master can be stored.
When lens extender setting is ON, White R/B, Flare R/G/B and
V Modulation Shading R/G/B/Master can be stored.
OHB File
R/G/B for each White Shading H SAW, H PARA,
V SAW, VPARA can be stored.
R/G/B for each Black Shading H SAW, H PARA, V SAW, and
V PARA can be stored.
And OHB matrix and the ND offset can be stored.
Output to
hardware*
hardware*