Sony BDV-IZ1000W User Manual

Page of 88
60
GB
[BD/DVD-ROM 1080/24p Output]
[Auto]: Outputs 1920 × 1080p/24 Hz video 
signals only when connecting a 1080/24p-
compatible TV using the HDMI OUT jack.
[Off]: Select this when your TV is not 
compatible with 1080/24p video signals.
[YCbCr/RGB (HDMI)]
[Auto]: Automatically detects the type of 
external device, and switches to the matching 
color setting.
[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2 video 
signals.
[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4 video 
signals.
[RGB]: Select this when connecting to a device 
with an HDCP-compliant DVI jack.
[HDMI Deep Colour Output]
[Auto]: Normally select this.
[12bit], [10bit]: Outputs 12bit/10bit video 
signals when the connected TV is compatible 
with Deep Colour.
[Off]: Select this when the picture is unstable or 
colors appear unnatural.
[Pause Mode] (BD/DVD VIDEO/DVD-R/
DVD-RW only)
[Auto]: The picture, including subjects that 
move dynamically, is output with no jitter. 
Normally select this position.
[Frame]: The picture, including subjects that do 
not move dynamically, is output in high 
resolution.
[Audio Settings]
[BD Audio MIX Setting]
[On]: Outputs the audio obtained by mixing the 
interactive audio and secondary audio to the 
primary audio.
[Off]: Outputs the primary audio only. Select 
this when outputting HD audio signals to an AV 
receiver.
[Audio DRC]
You can compress the dynamic range of the 
sound track.
[Auto]: Performs playback at the dynamic range 
specified by the disc (BD-ROM only).
[Off]: No compression of dynamic range.
[On]: The system reproduces the sound track 
with the kind of dynamic range that the 
recording engineer intended.
[Attenuate - AUDIO]
Distortion may occur when you listen to a 
component connected to the AUDIO (AUDIO 
IN L/R) jacks. You can prevent distortion by 
reducing the input level on the unit.
[On]: Attenuates the input level. The output 
level is changed.
[Off]: Normal input level.
[Audio Output]
The system cannot output multi-channel sound 
from both the HDMI (OUT) jack and system’s 
speakers simultaneously.
[Speaker]: Outputs multi-channel sound from 
the system’s speakers only.
[Speaker + HDMI]: Outputs multi-channel 
sound from the system’s speakers and 2-channel 
linear PCM signals from the HDMI (OUT) jack.
[HDMI]: Outputs multi-channel sound from the 
HDMI (OUT) jack only. Sound format depends 
on the connected component.
Note
• Even if [HDMI] or [Speaker + HDMI] is selected, the 
sound of functions other than “BD/DVD,” “D.