Sony 3-452-775-11(1) User Manual
51
Set
tin
tin
g
s and
Ad
ju
ju
st
m
ent
s
s
Network Settings
These items are necessary when you connect
to the Internet via a network cable. Enter the
respective (alphanumeric) values for your
broadband router or Wireless LAN router.
The items that need to be set may differ,
depending on the Internet service provider or
the router. For details, refer to the instruction
manuals that have been provided by your
Internet service provider or supplied with the
router.
to the Internet via a network cable. Enter the
respective (alphanumeric) values for your
broadband router or Wireless LAN router.
The items that need to be set may differ,
depending on the Internet service provider or
the router. For details, refer to the instruction
manuals that have been provided by your
Internet service provider or supplied with the
router.
1
Select “Internet Settings” in “Network
Settings,” and press ENTER.
Settings,” and press ENTER.
2
Select “IP Address Acquisition,” and
press ENTER.
press ENTER.
3
Select an item, and press ENTER.
• When you select “Use DHCP”
If you set “DNS Server Auto
Acquisition” to “Off,” set the following
item:
– DNS Server (Primary)/DNS Server
Acquisition” to “Off,” set the following
item:
– DNS Server (Primary)/DNS Server
(Secondary)
• When you select “Use Static IP
Address”
Set the following items:
– IP Address
– Subnet Mask
– Default Gateway
– DNS Server (Primary)/DNS Server
Set the following items:
– IP Address
– Subnet Mask
– Default Gateway
– DNS Server (Primary)/DNS Server
(Secondary)
b
When you set the “DNS Server (Primary)”/
“DNS Server (Secondary)” addresses
manually, enter the “DNS Server (Primary)”
address. Otherwise, the “Internet Settings”
will be set incorrectly.
“DNS Server (Secondary)” addresses
manually, enter the “DNS Server (Primary)”
address. Otherwise, the “Internet Settings”
will be set incorrectly.
4
If your ISP has a specific proxy server
setting, select “Proxy Settings” using
M/m, and press ENTER.
setting, select “Proxy Settings” using
M/m, and press ENTER.
The “Proxy Settings” display appears.
If the proxy server does not have a
specific setting, go to step 8.
If the proxy server does not have a
specific setting, go to step 8.
5
Set “Use of Proxy Server” to “On.”
6
Select “Proxy Server” and “Port,” and
enter the settings.
enter the settings.
To enter the proxy server, see “To enter
characters” (page 52).
characters” (page 52).
7
Press RETURN.
8
Select “Network Diagnostic” using M/
m, and press ENTER.
m, and press ENTER.
9
Select “Start,” and press ENTER.
10
Check that the message “Network
connections are correct.” appears.
connections are correct.” appears.
The setup is finished. If the message does
not appear, follow the on-screen
messages.
not appear, follow the on-screen
messages.
Internet Settings
Use DHCP
Select this when DHCP
(Dynamic Host
Configuration Protocol)
server settings are
available from your
Internet service
provider. The network
settings necessary for
the player will be
assigned automatically.
(Dynamic Host
Configuration Protocol)
server settings are
available from your
Internet service
provider. The network
settings necessary for
the player will be
assigned automatically.
Use Static IP
Address
Address
Set the IP address
manually according to
your network
environment.
manually according to
your network
environment.
,continued