Sony BDVN8100W User Manual

Page of 88
27
US
BDV-N9100W/BDV-N8100W/BDV-N7100W
4-456-334-12(1)
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 
01)\4456334121_US (U)\040GET.fm
masterpage: Right
G
e
tt
ing
 Started
Rear of the main unit
• Be sure to fully extend the FM wire antenna 
(aerial).
• After connecting the FM wire antenna (aerial), 
keep it as horizontal as possible.
If you have poor FM reception, use a 75-ohm 
coaxial cable (not supplied) to connect the main 
unit to an outdoor FM antenna (aerial).
Step 3: Preparing for 
Network Connection
To connect the system to your network, perform 
[Easy Network Settings]. For details, see “Step 5: 
Performing the Easy Setup” (page 31).
Select the method based on your LAN 
(Local Area Network) environment.
• If you use a wireless LAN
The system has built-in Wi-Fi, and you 
can connect the system to the network by 
making the network settings.
• If you use other than a wireless LAN
Use a LAN cable to connect to the LAN 
(100) terminal on the main unit.
A shielded interface cable (LAN cable), 
straight or crossover, is recommended.
Connecting the antenna 
(aerial)
Note
Tip
FM wire antenna (aerial)
(supplied)
or
Tip
Tip
Broadband router
LAN cable (not supplied)