Samsung BDH6500 Owner's Manual

Connections

You can connect your product to your network 
router using one of the methods illustrated 
below.
To use the AllShare network functionality, 
you must connect your PC to your network as 
shown in the illustrations. 
The connection can be wired or wireless.

| NOTE |

 

Your router or your Internet Service Provider's 
policies may prevent the product from accessing 
Samsung's software update server. If this occurs, 
contact your Internet Service Provider (ISP) for more 
information.

 

DSL users, please use a router to make a network 
connection.

| NOTE |

 

If your wireless router supports DHCP, this product 
can use a DHCP or static IP address to connect to 
the wireless network.

 

Set your wireless router to Infrastructure mode. Ad-
hoc mode is not supported.

 

The product supports only the following wireless 
security key protocols:

 

- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),  

WPA2-PSK (TKIP/AES)

 

Select a channel on the wireless router that is not 
currently being used. If the channel set for the 
wireless router is currently being used by another 
device nearby, it will result in interference and 
communication failure.

 

If you select the Pure High-throughput (Greenfield) 
802.11n mode and set the Encryption type on your 
router to WEP, TKIP or TKIP-AES (WPS2Mixed), the 
product will not support a connection in compliance 
with new Wi-Fi certification specifications.

 

Wireless LAN, by its nature, may cause interference, 
depending on the operating conditions (router 
performance, distance, obstacles, interference by 
other radio devices, etc).