Sony BDP-CX960 User Manual

Page of 207
4
US
• Observe following points to 
prevent the AC power cord 
being damaged. Do not use the 
AC power cord if it is 
damaged, as doing so may 
result in an electric shock or 
fire.
– Do not pinch the AC power 
cord between the player and 
wall, shelf, etc.
– Do not put anything heavy 
on the AC power cord or pull 
on the AC power cord itself.
On adjusting volume
Do not turn up the volume while 
listening to a section with very 
low level inputs or no audio 
signals. If you do, the speakers 
may be damaged when a peak 
level section is played.
On cleaning
Clean the cabinet, panel, and 
controls with a soft cloth slightly 
moistened with a mild detergent 
solution. Do not use any type of 
abrasive pad, scouring powder 
or solvent such as alcohol or 
benzine.
On cleaning discs, disc/
lens cleaners
Do not use cleaning discs or 
disc/lens cleaners (including wet 
or spray types). These may cause 
the apparatus to malfunction.
On replacement of parts
In the events that this player is 
repaired, repaired parts may be 
collected for reuse or recycling 
purposes.
• Do not use the following 
discs.
– A disc with a label or sticker 
on it.
– A disc that has cellophane 
tape or sticker adhesive on it.
– A disc that has a non-
standard shape (e.g., card, 
heart).
– 8 cm (3-inch) disc adaptor.
The player cannot play an 8 
cm disc. Do not insert an 8 
cm (3-inch) disc or an 8 cm 
(3-inch) disc adaptor. It may 
damage the player and disc.
– A lens cleaning disc.
• If you have printed the disc’s 
label, dry the label before 
playing.
• If burrs or adhesive material 
attach on the disc, the player 
may work unstably. In order to 
ensure stable operation, insert 
a disc after removing burrs or 
foreign objects. Burrs may be 
removed by rubbing the edge 
of the disc with the side of a 
pen or pencil. If a disc does not 
play, check for burrs on the 
disc and its two adjacent discs.
• Do not insert discs other than 
those described in “Playable 
Discs” (page 80).
 Inserting a 
disc in a format not compatible 
may cause a malfunction.
To ensure stable operation
• To keep the disc clean, handle 
the disc by its edge. Do not 
touch the surface. 
Be careful not to leave 
fingerprints especially on Blu-
ray Discs.
Dust, fingerprints, or scratches 
on the disc may cause it to 
malfunction.
• Clean the disc with a cleaning 
cloth. Wipe the disc from the 
center out.
• Do not resurface the playing 
side of a disc to remove 
surface scratches.
• Do not use solvents such as 
benzine, thinner, 
commercially available disc/
lens cleaners, or anti-static 
spray intended for vinyl LPs.
• Do not expose the disc to 
direct sunlight or heat sources 
such as hot air ducts, or leave it 
in a car parked in direct 
sunlight as the temperature 
may rise considerably inside 
the car.
• After removing a disc from the 
disc slot, store the disc in its 
case.
Notes about the 
discs
Tape or sticker
Adhesive 
material
Adaptor
8 cm disc
Burrs
Pen or 
pencil
Extra 
adhesive 
material