Panasonic BP325 User Manual

Page of 58
5 Troubleshooting
Troubleshooting
43
Trouble
shoo
ting
5
Troubleshooting
General
Symptom 
Cause & Solution
The Power does not turned on.
 
y Plug the power cord into the wall outlet securely.
The unit does not start 
playback.
 
y Insert a playable disc. (Check the disc type, colour system, and 
regional code.)
 
y Place the disc with the playback side down.
 
y Place the disc on the disc tray correctly inside the guide.
 
y Clean the disc.
 
y Cancel the Rating function or change the rating level.
The angle cannot be changed.
 
y Multi-angles are not recorded on the DVD Video being played.
Cannot play movie, photo or 
music files.
 
y The files are not recorded in a format that the unit can play.
 
y The unit does not support the codec of the movie file.
The remote control does not 
work properly.
 
y The remote control is not pointed at the remote sensor of the unit.
 
y The remote control is too far from the unit.
 
y There is an obstacle in the path of the remote control and the unit.
 
y The battery in the remote control is exhausted.
The unit is plugged in, but the 
power will not turn on or off.
You can reset the unit as follows.
 
y Unplug the power cord, wait at least five seconds, and then plug it in 
again.
The unit is not operating 
normally.